Mortgage rates explained

Refinance rate lock explained: lock, float, and what happens when the lock expires

A rate lock is a promise with an expiry date: the lender commits to an interest rate and points for your loan, provided you close within the lock period and nothing in your application changes. The decision is lock or float. Locking buys certainty at a known price. Floating keeps the chance of a better rate and takes the risk of a worse one. Locks are typically available for 30, 45, or 60 days, and sometimes longer. The rule this guide teaches is simple: lock when the quoted rate clears break-even inside your stay with room to spare and the lock period covers a realistic funding date with days left over, and float only when the dollars at stake are small or the closing is too far off for any lock to reach. Everything below prices that rule, starting with what a quarter point is actually worth on your balance.

Worksheet steps (8)
  1. Lock or float: the decision in one paragraph
  2. What a lock actually promises, and what it does not
  3. How long a lock runs, and how to pick the length
  4. What a quarter point is worth on your balance
  5. Floating: what you gain and what you risk
  6. Float-downs: paying for a second chance
  7. When the lock expires before closing
  8. Five questions to ask before you lock

Lock or float: the decision in one paragraph

Start with the dollars, not with a feeling about where rates are headed. A quarter point on a $400,000 balance over 30 years is $68.15 a month, $817.83 a year, and $5,043.81 of interest saved over the first five years when the balance difference is counted. On a $200,000 balance the same quarter point is about $34.08 a month. On a $150,000 balance with two years left before a move, it is smaller still. The lock-or-float decision is a bet sized by those numbers: if the rate moves against you by a quarter point while you float, that is what it costs, and if it moves for you, that is what it saves. Nobody can price the move in advance. Everybody can price the stake.

That framing gives the decision rule. Lock when three things are true: the quoted rate clears break-even inside a stay you can defend, with room to spare; the lock period covers a realistic funding date, not an optimistic signing date, with days of slack; and you have already compared identical terms across lenders, so the rate you are locking is a tested price. Float when the closing is too far off for any lock to reach, when the balance is small and the stay is short so the stake is small, or when you have not yet finished shopping and locking now would protect a price you never tested. What never works is floating because a lock feels expensive and locking because floating feels scary. Both feelings are real and both are priced in the wrong currency. Price the stake in dollars, then choose.

One more fact frames the whole guide. A lock can also lock you out of a lower rate if rates fall after you get your loan offer. The Consumer Financial Protection Bureau states that downside plainly, and it is a market outcome, not a fee, and one no calculator can price in advance. A float-down can soften it, at a price, and the section on float-downs below works that trade. But the core trade never changes: a lock trades the chance of a better rate for certainty about the rate you have, and the right price for that trade is the one you can afford to be wrong about.

What a lock actually promises, and what it does not

In the Consumer Financial Protection Bureau's definition, a lock-in or rate lock on a mortgage loan means that your interest rate will not change between the offer and closing, as long as you close within the specified time frame and there are no changes to your application. Mortgage interest rates can change daily, sometimes hourly, and if your rate is locked, your rate will not change between when you get the rate lock and closing, on those two conditions. If your rate is not locked, it can change at any time. That is the whole promise, and the two conditions carry all of the weight.

The first condition is the time frame, and it is printed on your Loan Estimate. Some lenders lock your rate as part of issuing a Loan Estimate, but some do not, so check at the top of page 1 to see if your rate is locked, and for how long. The expiry is a date and a time, not a vague window, and the rate has to survive until funding, not merely until signing. On many owner-occupied refinances, funding comes after the three business day rescission window, so a lock that expires on the signing day has already failed. The how long refinancing takes guide counts that calendar day by day.

The second condition is your application, and it is the one borrowers forget. Your locked rate can still change if there are changes in your application, including your loan amount, credit score, or verified income. The Bureau lists the common reasons: you change the kind of loan you are requesting or the amount of your down payment, the appraisal comes in higher or lower than expected, your credit score changes, for example because you applied for or took out a new loan or missed a payment, or your lender cannot document your overtime, bonus, or other income. A lock is a promise about the market, not about your file. Keep the file still while the lock runs: do not open new credit, do not move large sums without a paper trail, and tell the lender the same day anything changes.

How long a lock runs, and how to pick the length

Rate locks are typically available for 30, 45, or 60 days, and sometimes longer. A longer promise generally costs more than a short one, either as an explicit fee or as a slightly worse rate or points for the same loan. The Loan Estimate will not tell you what the lock timeframe costs, and it will not tell you what an extension costs, so both numbers exist only in the answer to a question you have to ask before you lock. Ask it in writing, and ask for the price of the next longer period too, because the comparison you need is the cost of the longer lock against the cost of the shorter lock plus an extension.

Pick the length against a realistic funding date, not the fastest case. Ask the lender how many days it needs from lock to funding on a file like yours, then add margin for the appraisal, because the appraisal is the step most likely to run long and the one you control least. If the appraisal and title work in your area are slow, a 45 or 60 day lock can cost less in total than a 30 day lock plus an extension. The cheapest extension is the one you never need, and the most expensive lock is the short one that expires three days before funding. Match the period to the file, not to the rate: a great rate on a lock that cannot reach funding is not a great rate.

New construction is the longest case and the exception that proves the rule. A single-close construction phase can run up to 18 months before it converts, which is far beyond any standard lock, and the rate exposure across a 9 to 12 month build shows how far the weekly survey average moved during four past builds. If your refinance follows a construction phase, ask about a long lock or a float arrangement designed for it, and do not assume a standard 60 day lock can be stretched to fit. For an ordinary refinance of an existing home, the choice is 30, 45, or 60 days, and the right one is the shortest period that still covers a realistic funding date with slack.

What a quarter point is worth on your balance

The chart below prices the lock-or-float decision on a labelled illustration: a $400,000 balance, a 30-year term, fixed rates of 7.00, 7.25, and 7.50 percent. These are labelled hypotheticals, not survey averages and not quotes. For market context only, the Freddie Mac Primary Mortgage Market Survey release dated November 5, 2026 put the national 30-year fixed average at 7.18 percent and the 15-year fixed average at 6.57 percent. That average is a backdrop, not a rate any lender owes you, and it is not one of the rates in this example.

A quarter point looks small as a percentage and reads differently as dollars. At 7.50 percent the payment is $2,796.86 a month. At 7.25 percent it is $2,728.71, or $68.15 less. At 7.00 percent it is $2,661.21, or $135.65 less than the highest rate. Over a year the quarter point is $817.83. Over 60 payments it is $4,089.17. And over the first five years the lower rate saves more than the payment difference alone, because the lower rate also pays the balance down faster: the balance after 60 payments is $954.64 lower at 7.25 percent than at 7.50 percent, so the interest saved over the first 60 months is $5,043.81. The worked example below the chart shows the formula and every figure.

What each quarter point adds to the monthly payment on a $400,000 loan Bar chart of the extra monthly principal and interest on a labelled $400,000, 30-year illustration. At 7.00 percent the payment is $2,661.21 a month. At 7.25 percent it is $2,728.71, or $68.15 more. At 7.50 percent it is $2,796.86, or $135.65 more. $150$100$50$07.00 percent: $0 extra per month7.00%$687.25 percent: $68.15 extra per month7.25%$1367.50 percent: $135.65 extra per month7.50%Extra principal and interest per month vs the 7.00% loan
What each quarter point adds to the monthly payment on a $400,000 loan Labelled illustration: $400,000 balance, 30-year term, fixed rates shown. Payments are principal and interest only. A quarter point is worth $68.15 a month on this balance, and a half point is worth $135.65. Source: standard amortization formula, computed for this illustration and checked November 10, 2026. Rates are labelled hypotheticals, not survey averages and not quotes.
Show the payment figures behind this chart
RateMonthly principal and interestExtra per month vs 7.00%Extra over 60 payments
7.00%$2,661.21$0.00$0.00
7.25%$2,728.71$68.15$4,089.17
7.50%$2,796.86$135.65$8,138.88

Use the chart to size your own stake before you decide. The payment scales with the balance, so halve the balance and halve the dollars: on a $200,000 balance the same quarter point is about $34.08 a month. Then set that monthly figure against your stay. A quarter point that costs $68.15 a month is $817.83 a year, and on a stay of two years it is about $1,636 of payments plus the balance difference, while on a stay of ten years it is more than $8,000 of payments alone. The longer the stay and the larger the balance, the more the lock is worth, and the less sense floating makes as a casual choice.

The same arithmetic disciplines the float-down question and the extension question. A float-down that costs $1,000 to buy the chance of a quarter point improvement is a poor purchase on a $200,000 balance with a short stay, where the improvement is worth about $34 a month, and a reasonable question on a $400,000 balance with a long stay, where it is worth $68 a month for years. An extension that costs a few hundred dollars to protect a quarter point on a large balance can be cheap insurance. Price each of them in dollars on your balance and your stay, and the decision usually makes itself.

What a quarter point costs on $400,000

Labelled hypothetical illustration, arithmetic checked. The formula for a monthly principal and interest payment is M = P times r times (1 + r) to the power n, divided by ((1 + r) to the power n minus 1), where P is the balance, r is the annual rate divided by 12, and n is the number of monthly payments. On a $400,000 balance with a 30-year term, n is 360. At a hypothetical 7.50 percent, r is 0.00625 and the payment is $2,796.86 a month. At a hypothetical 7.25 percent, r is 0.00604167 and the payment is $2,728.71 a month. At a hypothetical 7.00 percent, r is 0.00583333 and the payment is $2,661.21 a month. The quarter point between 7.50 and 7.25 percent is worth $68.15 a month, $817.83 a year, and $4,089.17 over 60 payments. The half point between 7.50 and 7.00 percent is worth $135.65 a month, $1,627.78 a year, and $8,138.88 over 60 payments. Over the first five years the lower rate saves more than the payment difference alone: at 7.25 percent the balance after 60 payments is $377,515.11, against $378,469.75 at 7.50 percent, a difference of $954.64, so the interest saved over the first 60 months is $4,089.17 of lower payments plus $954.64 of lower balance, or $5,043.81. On a $200,000 balance the same quarter point is worth about half as much, $34.08 a month, because the payment scales with the balance. Figures are rounded to the cent; totals are computed before rounding, so a total can differ by a few cents from the rounded figures multiplied out. Balance $400,000, term 30 years, stay horizon five years for the comparison. Every rate here is a labelled hypothetical, not a survey average and not a quote.

Floating: what you gain and what you risk

Floating means your rate is not locked, so it can change at any time, up or down. The gain is the chance of a better rate: if rates fall while you float, you lock the lower number and keep the difference for the life of the loan. The risk is the mirror image: if rates rise while you float, you lock the higher number, or you pay for an extension of a lock you never had, which is to say you pay in rate rather than in fees. There is no free direction. A float is a bet that rates will fall, or at least not rise, before you lock, and the stake is the monthly difference priced in the chart above.

Floating makes sense in three situations. The first is distance: closing is too far off for any lock to reach, so there is nothing to lock yet, and floating is not a choice but a fact. The second is a small stake: the balance is small and the stay is short, so a quarter point either way is worth tens of dollars a month and the decision barely matters. The third is unfinished shopping: you have not yet compared identical terms across lenders, and locking now would protect a price you never tested. In that case float while you shop, then lock the best quote for a period that covers funding.

Floating stops making sense at the point where the lock period can no longer cover the funding date. Once the calendar decides for you, the choice is gone, and the rate you get is the rate on the day the lock finally starts, whatever it is. A practical rule is to set a float deadline in writing when you start: a date by which you will lock whatever the rate is, or a rate at which you will lock immediately. Write it down before the market moves, because a deadline decided after a rate rise is not a deadline, it is a regret with a date on it. And remember the Bureau's warning in the other direction: a lock can lock you out of a lower rate if rates fall. Floating keeps that door open, and the price of the open door is the risk on the other side.

Float-downs: paying for a second chance

A float-down is an option attached to some locks: you lock today's rate, and if rates improve before closing, you may exercise the option to take the better pricing once, under the option's terms. It is insurance against the lock's main downside, the chance that rates fall after you commit. Like any insurance, it has a price, a limit, and conditions, and like any insurance it is worth buying only when the protection is worth more than the premium on your numbers.

Structures vary, and the Consumer Financial Protection Bureau publishes no standard form for them, so treat every description as a prompt for questions rather than a definition. Typical structures charge for the option upfront or build its cost into the rate, allow a single exercise, set a deadline by which it must be exercised, and define how much improvement is needed before it can trigger. Before paying for one, ask: what does the option cost, how many times can it be exercised, by what date, how large an improvement triggers it, and does exercising it extend or restart any clock? Get the answers in writing on the lock agreement, not in a conversation, because the option's terms are the whole product.

The decision test is the same dollars test as the lock itself. On the $400,000 illustration, a quarter point improvement is worth $68.15 a month, $817.83 a year, and $5,043.81 of interest over the first five years when the balance difference is counted. If the float-down costs a few hundred dollars and the improvement it can deliver is a quarter point on a balance that size with a stay of years, the trade can make sense. If it costs more than the improvement is worth on your balance and your stay, or if the trigger requires a half point improvement that the market rarely delivers inside a 45-day window, the money is better kept. The rate lock fees and extensions guide covers the pricing structures and the questions to ask in detail. This guide's contribution is the test: price the improvement on your balance, price the option, and buy only when the first is larger than the second.

When the lock expires before closing

Closings run late for ordinary reasons: appraisal scheduling, title problems, underwriting conditions, a payoff statement that expires. If your loan is not ready to fund before the lock expires, the lender can usually extend the lock, and the Consumer Financial Protection Bureau warns that it may be expensive to extend if your transaction needs more time. Extension pricing is set by each lender's policy and by market movement since you locked, so this site publishes no figures for it. The structure, though, is askable in advance: how long an extension runs, what it costs, and whether it is quoted as a fee, as points, or as a rate change. Ask before you lock, because at expiry you have no leverage.

The second outcome is a re-lock at current market rates. The lender prices the loan again at whatever the market offers on the day the old lock expires, which may be higher or lower than the expired lock. A re-lock is not an extension: it is a new price, and it has to be disclosed like one. If the annual percentage rate moves past its tolerance, the lender must deliver a corrected Closing Disclosure and you must receive it at least three business days before consummation, under 12 CFR 1026.19(f)(2)(ii), which pushes the signing back by a fresh wait. A late change to the loan product or the addition of a prepayment penalty does the same. Read that as protection, not delay: each of the three is a change large enough that you should not be seeing it for the first time at the table.

The third outcome is walking away. You can let the lock expire, decline the extension price, and restart with a new application, a new appraisal, and new costs. That is sometimes the right answer, when the re-locked rate no longer clears break-even inside your stay, or when the extension price eats the saving the refinance was meant to deliver. Run the break-even again on the new numbers before you decide, with the new rate, the new costs including any extension or re-lock charge, and the same stay horizon. A refinance that broke even in month 19 before an extension does not break even in month 19 after one. The cheapest extension is the one you never need: match the lock period to a realistic closing timeline when you lock, not the optimistic one, and hold the loan still in the last week so nothing forces a new disclosure.

Five questions to ask before you lock

The Consumer Financial Protection Bureau publishes the questions, and they are worth asking word for word. First, what does it mean if I lock my rate today? Second, what rate lock time frame does this Loan Estimate provide? Third, is a shorter or longer rate lock available, and at what cost? Fourth, what if my closing is delayed and the rate lock expires? Fifth, if I lock my rate, are there any conditions under which my rate could still change, and if I lock my rate and interest rates go down, what happens? The answers to those five, in writing, are the lock agreement in plain language, and a lender who cannot answer them clearly is a lender whose lock you should not buy.

Add two questions of your own. Ask what the extension costs, in dollars, for one week and for two, and whether the extension is priced as a fee, as points, or as a rate change. Then ask whether the lock period covers funding or only signing, and what happens to the rate if funding slips past the rescission window. The first question prices the risk. The second question names the date that actually matters. A lock that expires on the signing day is a lock that was measured against the wrong date, and the cost of that mistake is discovered at the worst possible moment: after the appraisal is paid for and the old loan is about to be paid off.

Finally, run the sequence in this order: get the lock terms and the extension price in writing, choose a period that fits your timeline, then run the calculator with the all-in closing costs, and only then judge the loan against your stay horizon. The break-even explained guide covers that final test. A lock protects a rate; it does not make a refinance worth doing. And the rate the lock protects is only as good as the shopping behind it: a locked rate on an unshopped loan is a certain price for an uncertain deal, and certainty about the wrong number is not worth paying for.

Locking too early, or too short

Locking the first quote before shopping, or locking a period that ends at signing instead of funding. The first mistake protects a price you never tested. The second mistake protects a rate that expires before the money moves. Both are made in the same moment, when the lock is agreed, and both are expensive to fix after the appraisal is paid for.

Lock terms to confirm in writing

  • Confirm on page 1 of the Loan Estimate whether the rate is locked and the exact expiry date and time.
  • Check the lock expiry date against the funding date, not the signing date, and leave days of slack past the rescission window.
  • Ask, in writing, what a longer lock costs and what an extension costs, before locking.
  • Ask, in writing, what would change the locked rate: appraisal value, loan type, credit score, or unverifiable income.
  • If a float-down is offered, get its cost, exercise limit, deadline, and trigger in writing, and compare it with simply taking the standard lock.
  • Price the quarter point on your own balance with the formula in this guide, then decide lock or float on dollars, not on a feeling about rates.
  • Add any lock, extension, or float-down charge into total closing costs and re-run the break-even before you judge the loan.

Common questions

Should I lock or float my refinance rate?

Lock when the quoted rate, on the term you actually want, clears break-even inside your stay with room to spare, and when the lock period covers a realistic funding date with days left over. Float when closing is far off and no lock is available yet, or when the balance is small and the stay is short, so a quarter point either way is worth tens of dollars a month rather than hundreds. Never lock the first quote before you have compared identical terms: locking an unshopped price protects a price you never tested. And never float past the point where the lock period can no longer cover the funding date, because then the choice is made for you by the calendar.

How long does a rate lock last?

The Consumer Financial Protection Bureau says rate locks are typically available for 30, 45, or 60 days, and sometimes longer. Page 1 of your Loan Estimate shows whether your rate is locked and the date and time the lock expires. The period that matters is the one that covers funding, not signing, because on many owner-occupied refinances funding comes after the three business day rescission window. A 30-day lock on a file that funds on day 33 has expired before the money moves.

What happens if my rate lock expires before closing?

Three outcomes are possible. The lender can usually extend the lock, and the Consumer Financial Protection Bureau warns that it may be expensive to extend if your transaction needs more time. The lender can re-lock the loan at current market rates, which may be higher or lower than the expired lock. Or you can walk away and restart with a new application and new costs. Extension pricing is set by each lender's policy and by market movement since you locked, and the Loan Estimate will not show you the extension price, so ask for it in writing before you lock. The rate lock fees and extensions guide prices the extension and float-down structures in detail.

Can my locked rate change before closing?

Yes, if your application changes. The Consumer Financial Protection Bureau lists the common reasons: you change the kind of loan you are requesting or the amount of your down payment, the appraisal comes in higher or lower than expected, your credit score changes, or your lender cannot document your overtime, bonus, or other income. A lock is a promise about the market, not about your file. If your file changes, the pricing built on it can be reopened, even inside the lock period. Tell the lender the same day a change happens, because a change discovered at the closing table costs a new disclosure and very likely a new wait.

What is a float-down, and is it worth paying for?

A float-down is an option attached to some locks: you lock today's rate, and if rates improve before closing, you may exercise the option to take the better pricing once, under the option's terms. Structures vary and the Consumer Financial Protection Bureau publishes no standard form for them, so treat every description as a prompt for questions. Ask what the option costs, how many times it can be exercised, by what date, how large an improvement triggers it, and whether exercising it extends or restarts any clock. Then compare the cost against the value of the improvement it can buy on your balance, using the worked example in this guide: on a $400,000 balance a quarter point is worth $68.15 a month, so a float-down that costs more than the improvement it can deliver is a poor purchase on those numbers.

Does the Loan Estimate show my lock and what an extension costs?

Partly. Page 1 of the Loan Estimate shows whether your rate is locked and, if so, the date and time the lock expires, alongside the date the other closing cost estimates expire. What it will not show you is the price of time beyond the lock: the Consumer Financial Protection Bureau states directly that your Loan Estimate will not show the price for an extension or for the rate lock timeframe. Ask the lender before you lock, and get the answer in writing. Any explicit lock fee belongs in Section A origination charges, and it joins the total your monthly saving has to repay.

Should I lock before I have compared lenders?

No. Shop first, lock second. A lock holds a stated rate for a stated number of days, and locking the first quote before you have compared identical terms locks in an unshopped price. Collect Loan Estimates on the same balance, the same term, zero points, and no lender credit, on the same day, and compare the Section A totals before comparing any rate with points folded in. Once you have the best quote, lock it for a period that covers a realistic funding date with days of slack. The step-by-step refinance guide works the shopping sequence, and the how long refinancing takes guide counts the timeline the lock has to cover.

Sources and verification

  • Consumer Financial Protection Bureau, What is a rate lock?: consumerfinance.gov Ask CFPB, last reviewed May 2, 2023: a lock means the rate will not change between the offer and closing as long as you close within the specified time frame and there are no changes to your application; locks are typically available for 30, 45, or 60 days, and sometimes longer; extending may be expensive; a lock can lock you out of a lower rate; the Loan Estimate shows the lock status but not the extension price; application changes that can move a locked rate. Checked November 10, 2026.
  • Consumer Financial Protection Bureau, Loan Estimate explainer: consumerfinance.gov page-by-page guide to the Loan Estimate: rate lock information on page 1, including whether the rate is locked and the expiry date and time; origination charges in Section A, including rate-lock fees. Checked November 10, 2026.
  • Consumer Financial Protection Bureau, 12 CFR 1026.19, Regulation Z Loan Estimate and Closing Disclosure timing: consumerfinance.gov regulation text: corrected Closing Disclosure and a new three business day wait when the annual percentage rate becomes inaccurate, the loan product changes, or a prepayment penalty is added, (f)(2)(ii); Closing Disclosure received no later than three business days before consummation, (f)(1)(ii)(A). Checked November 10, 2026.
  • Consumer Financial Protection Bureau, Closing Disclosure explainer: consumerfinance.gov guide to the Closing Disclosure: the lender must provide it three business days before the scheduled closing; if the interest rate is not what was expected, ask why, and a locked rate can change only under limited circumstances. Checked November 10, 2026.
  • Freddie Mac Primary Mortgage Market Survey: Weekly national average rate survey. The release dated November 5, 2026 put the 30-year fixed average at 7.18 percent and the 15-year fixed average at 6.57 percent. Used here only as dated market context, never as an example rate or a quote. Checked November 10, 2026.

Educational explanation, not a quote. Your lock period, extension terms, and any float-down rules are set by your lender in writing on your lock agreement, which governs your transaction. The example rates are labelled hypotheticals, not survey averages and not quotes.